Why can’t I feed Flexy in my 3Doodler Create?

Flexy strand can expand from the heat of the pen, making it more difficult to feed. Try cutting the end of the strand at a 45 degree angle, and use the pen on slow mode. That should make it easier to feed. If you still have issues feeding Flexy, please contact our customer service team by emailing us here: [email protected]

Category: Create Troubleshooting

Related FAQs

  • Is 3Doodler Create safe for children?

    The 3Doodler is NOT a toy for children (it’s for ages 14+). It has a metal tip that can get as hot as 240C.

  • Does the 3Doodler Create have variable speeds?

    Yes! The 3Doodler Create has two speeds, fast and slow. These determine the flow of the plastic and allow you to doodle large items and fill a large area at pace, or doodle intricate and delicate details (as well as drawing in the air). You can switch between the two speeds by choosing to press either the FAST button or SLOW doodle button on the body of the pen.

  • Can I use the 3Doodler Start with my Create DoodlePad or other 3Doodler Create Accessories?

    No, the 3Doodler Start is not compatible with any of the 3Doodler 1.0, 2.0, or Create products or accessories, including Plastic Strands, DoodlePad, Nozzle Set, JetPack, Doodlestand, or Pedal. The only exception is the Project Book, which we encourage using for 3Doodler Start projects too.