I used a strand of plastic, reversed it, and then decided to change colors. Can I reuse the original strand of unused plastic?

Yes of course, but before inserting the used strand into the 3Doodler, please cut the tip of the strand so that it has a clean edge. This will help prevent jamming and other issues.

Category: Create

Related FAQs

  • How do I reverse a plastic strand in the 3Doodler Start?

    Simply double click the large Feed Button (Stop / Start Button) to reverse a plastic strand when you want to switch color or when you’re ready to stop using the pen.

  • The gallery shows many colors of plastic! Can I use these plastic colors with my 3Doodler Start?

    Please note that the 3Doodler Start is only compatible with the 3Doodler Start Eco-Plastic filaments. The 3Doodler Start isn't compatible with any of the plastics designed for the Create or the PRO. To view our comprehensive compatibility chart, please check the following link: www.the3doodler.com/compatibility

  • How much use will I get out of a plastic strand?

    One plastic strand stretches to a maximum of ten times its original length once extruded by the pen. Start Eco-plastic strands are 6 inches / 15 cm long, meaning you'll get around 60 inches / 150cm of Doodling. Create+ / PRO+ plastic strands are cut at 10 inches / 25cm in length, providing you with around 100 inches / 250cm of Doodling - allowing for hours of play in each pack! The exact length will depend on how fast you draw and how thick or thin the line of extruded plastic is. You can refer to our our Gallery here…