The plastic is moving slowly. What do I do?

Sometimes when you get to the end of one strand, extrusion slows noticeably. Put a new strand into the back of the 3Doodler pen. If it still extrudes very slowly (or not at all), try giving the new one a little nudge down, and that should do the trick!

Category: General Plastics & Accessories

Related FAQs

  • Why is the plastic not coming off of my Create+/PRO+ DoodlePad?

    We have two DoodlePads available, one for the Create+ and the PRO+, and one for the Start. To ensure you are using compatible products, please check here: www.the3doodler.com/compatibility Compatible: ABS, PLA, NYLON (PRO+ pen only) Compatible on Backside of DoodlePad Only: FLEXY, WOOD, Metal (PRO+ pen only) Not Compatible: Start Plastic (Start DoodlePad only) Do not press the nozzle directly onto the DoodlePad, as filament may adhere to the surface. You can bend the DoodlePad to easily pop your Doodles off. Sometimes, Doodles may need to be removed with a putty knife. Doodles might become damaged in the removal process,…

  • Can I use 1.75mm plastic?

    No. The 3Doodler Create+ and PRO+ pens only work with 3Doodler-branded 3mm plastic strands. Likewise, the 3Doodler Start is only compatible with 3Doodler-branded Start Eco-Plastic filament, which are 2.5mm in diameter. Plastics cannot (and should not) be combined. Use of other materials not approved by us may result in damage to your pen, and will void your warranty.

  • Are the 2.0/Create accessories and plastics compatible with the Create+?

    Yes! The Create and 2.0 plastics and accessories are ALL compatible with the new 3Doodler Create+ pens. Wood filament, however, is only compatible with the Create+ and the PRO, and not the Create or 2.0 pens.