Why did my 3Doodler PRO+ stop after 30 minutes of extrusion?

The 3Doodler PRO+ automatically stops after 30 minutes of continuous extrusion, just like the 3Doodler Create+. This is a safety feature. The Screen will show "CD" for cooling down and you will have to wait 2min until the "CD" goes away on the display. Once it goes away, you can simply press the extrusion button to continue Doodling.

Category: Pro

Related FAQs

  • How do I adjust the extrusion speed on the 3Doodler PRO+?

    After you select the preset mode of your choice, you will see a flashing number, which is the speed. Use the arrow keys on the side of the screen to select the speed of your choice from 1-10, 1 being the slowest and 10 being the fastest. After setting the desired speed, hit the select key underneath the display to lock in the setting.

  • Is 3Doodler PRO+ safe for children?

    No. Please keep the 3Doodler PRO+ out of reach of children.

  • How does one charge the 3Doodler PRO+?

    The 3Doodler PRO+ must be plugged in in order to function. There is no internal battery, so it doesn't have the capability to be charged.