What is the Nozzle Set?

The Nozzle Set is made up of two main items:

1. The Nozzle holder, which also doubles as a nozzle removal tool.

2. Six different nozzles, including a ribbon tip, square tip, triangle tip, a super fine 0.5mm nozzle, and thicker 1mm and 1.5mm nozzles.

Category: Create Plastics & Accessories

Related FAQs

  • The tip of my pen broke off, and I can no longer attach the nozzle!

    Kindly note that the 3Doodler instructions explicitly say that you should carefully change the pen tip when it is plugged in, on, and fully heated up. Doing this may prevent the pen tip from breaking in the future. Unfortunately we don’t have a way to repair pens with broken tips, but if you are covered by our warranty we will happily replace your device. Please contact our customer service team by emailing us at and we will get that taken care of for you.

  • How do I remove the nozzle on the 3Doodler PRO+?

    To remove the nozzle of the 3Doodler PRO+, you must have the pen turned on and heated to at least 180 degrees Celsius / 356 degrees Fahrenheit. Any of the pre-set material temps other than wood will be hot enough. Using the included nozzle set (which has a nozzle removal tool built into it), unscrew the nozzle in a counterclockwise direction. When replacing the nozzle, make sure the pen is at least 180 degrees Celsius / 356 degrees Fahrenheit, and screw it back on with the nozzle set in a clockwise direction. It is important that you do not over-tighten…

  • Are different sized nozzles available?

    The 3Doodler Create+ is compatible with the Nozzle Set, which is sold separately through our website. The 3Doodler PRO+ comes with a 6 piece interchangeable nozzle set of different sizes and shapes. The 3Doodler Start is not compatible with the nozzle set. To view our comprehensive compatibility chart, please visit this link here: www.the3doodler.com/compatibility