Can I leave the filament in the pen when I turn the pen off?

Please don't! We've found that leaving warm filament in the pen accelerates the degradation of the filament and can cause issues with the pen over time.

Category: Create

Related FAQs

  • Is the filament hot when it comes out of the pen?

    For the Create+, our filaments vary in temperature but get very hot, so we do not recommend touching the filament within 5 seconds of it coming out of the pen. Please do not touch the pen tip when it is hot, as it can cause burns. For the 3Doodler Start and 3D Build & Play, the filament is warm when extruded and is safe to touch, and the pen tip doesn't get hot. There is not any burn risk with the 3Doodler Start or the 3D Build & Play.

  • How do you know when you need to load more filament into the pen?

    The pen will generally stop extruding filament or you will notice a marked slowdown in the extrusion speed. Just add a new strand, give it a gentle nudge if needed, and your 3Doodler should start extruding again. The last bit of the previous strand will extrude before the new strand begins to.

  • How is the 3Doodler PRO+ different than the 3Doodler Create?

    The PRO+ is designed for a more advanced adult user looking for more customization and control than what can be achieved with the Create+ pen set. For example, the PRO+ can accommodate up to 7 different types of materials, and offers users more choices in terms of temperature and extrusion speed. The Create+ is great for casual users, or for anyone who’s using a 3D printing pen for the first time.