What mode should my Create+ be in when using Wood filament?

Wood filament is best used on the PLA setting and in SLOW mode with the Create+.

Category: Create

I saw that you recently announced Wood filament can be used with the Create+. Does this mean the Create too?
Sorry, no! Wood filament is not recommended to be used with the Create.
Why is my 3Doodler Create having difficulty feeding PLA?
PLA feeding issues are often corrected by adjusting the temperature manually. Try lowering the heat by inserting the mini screwdriver into the temperature adjustment hole (located next to the On/Off switch), and turning it 90 degrees counter-clockwise. If you continue to have PLA feeding issues please contact our customer service team by emailing us here:
What are the melting temperatures for ABS, PLA, and FLEXY in the Create/Create+?
Please note the following temperature ranges that the Create and Create+ pens melt filaments at: PLA: 180-190 C / 356-374 F ABS/FLEXY: 200-220 C / 392-428 F

Commonly searched